All Wood Cabinet Construction

KCMA Certified Cabinets

Typical Wall Cabinet
(shown without left end panel)

  1. Adjustable Shelves: 3/4" thick plywood permanently laminated on 2 sides, or top-coated or stained, and wood veneer edge banded. Resistant to water and most household chemicals if laminated.

  2. End Panels: 1/2" thick plywood permanently laminated on 2 sides and resistant to water and most household chemicals or top-coated or stained. Line-bored for 5mm adjustable shelf pins. Exposed ends receive a 1/4" plywood skin, or upgraded to a ¼” engineered wood skin, or optional raised panel.

  3. Back: 1/8" thick plywood, and matches the shelving and end panel material.

  4. Top/Bottom: 1/2" thick plywood permanently laminated on 2 sides and resistant to water and most household chemical, or top-coated or stained.

  5. Doors: Raised panel – 3/4” lumber stiles/rails with cope-and-stick construction.  3/4” solid lumber panels.  Flat panel – 3/4” lumber stiles/rails with cope-and-stick construction. 1/4” thick plywood center panel.

  6. Face Frame: 3/4” thick lumber glued and screwed from the back side using pocket bores.  Vertical end stiles are 1-1/2” wide and center stiles are 3”.  Horizontal rails are 2” wide.

  7. Hinges: Selection of bronze plated semi-concealed knife hinge or nickel plated concealed European hinges.  Overlays include 1/4”, 1/2” and 1-1/4”.  Soft close hinges also available.

  8. Nailer: (hanging rails): 3/4” thick pine lumber attached behind the cabinet back.

  9. Door Bumpers: Clear plastic stick-on.

Typical Base Cabinet
(shown without left end panel)

  1. Fixed Half Shelves: 3/4" Thick plywood, permanently laminated on 2 sides for Resistance to water and most household chemicals, or top-coated or stained, then wood veneer edge banded. Optional full shelf available.

  2. End Panels: 1/2" thick plywood permanently laminated on 2 sides for resistance to water and most household chemicals, or top-coated or stained. Exposed ends receive a 1/4" plywood skin or optional raised panel.

  3. Back: 1/8" thick plywood, and matches the shelving and end panel material.

  4. Floor: 1/2" thick plywood permanently laminated on 2 sides for resistance to water and most household chemicals, or top-coated or stained.

  5. Doors: Raised panel - 3/4" lumber stiles/rails with cope-and-stick construction. 3/4" solid lumber panels. Flat panel - 3/4" lumber stiles/rails with cope-and-stick construction. 1/4" thick plywood center panel.

  6. Face Frame: 3/4" thick lumber glued and screwed from the back side using pocket bores. Vertical end stiles are 1-1/2" wide and center stiles are 3". Horizontal rails are 2" wide.

  7. Hinges: Selection of bronze plated semi-concealed knife hinge or nickel plated concealed European hinges. Overlays include 1/4", 1/2", and 1-1/4". Soft close hinges also available.

  8. Nailers: (hanging rails): 3/4" thick pine lumber attached behind the cabinet back.

  9. Door and Drawer Bumpers: Clear plastic stick-on.

  10. Drawer Guides: Customer choice. Side mounted, self closing epoxy coated steel with self adjusting features, or steel side-mount full extension or ultra smooth, self closing under-mount full extension guides.

  11. Drawer Box: 1/2" thick Baltic birch plywood with optional dovetail joints. 1/8" or 1/4" thick bottoms. Optional 5/8" thick maple lumber dovetail box available. All drawer boxes receive a clear topcoat finish.

“I use Kent Moore Cabinets in all my custom homes. The quality and craftsmanship of these cabinets add a touch of elegance, style and sophistication that my homebuyers are looking for in today's homes. Kent Moore Cabinets offer a wide variety of cabinet styles, wood choices and custom finishes. The Kent Moore staff takes the time to listen to what the homebuyer wants, and they design, build and install cabinets that produces that "Wow" effect.I love the beauty of Kent Moore Cabinets in my homes!”

— Windmill Custom Homes